In the event the Backlight Of The LCD Computer screen Has Failed_2.

Discover the battery-release latch and press down on there with one hand, and then pull the battery outside the case, setting the notebook computer battery aside.
The convenience given by the portability of a notebook computer can
become a hindrance a result of the screen malfunctions? it seriously isn't easy to
connect a new monitor as you're able with a desktop system. If the backlight
on the LCD screen has was unsuccessful, you can see any kind of image. To fix all the
problem, the entire inverter board and connected LCD cable requires
to be manually supplanted. Here below are the instruction on your
reference.
1. Check from the manual of your computer or search the infomation through
the Internet to support the a part of the manufacturer抯 websites. Simply just
get that what design fo inverter board you would like for your computer, carry
my Pavilion DV2000 Tv screen as instance, I try to find a right one from a good site, HooToo. com, then i fix it on my own.
2. Turn off a laptop抯 operation system. De-activate the LCD screen
top. CTurn the whole laptop over to ensure the bottom end of the result is facing
up when it comes to you. Locate the battery-release latch and press down on there
with one hand, and then pull the battery outside the case, setting the notebook computer battery aside.
3. Locate the rubber pieces within the edges and the surface of the LCD. Pop the
stopper pieces from the case by inserting a set object underneath
them then pulling out toward a person. Use a screwdriver to retrieve the
screws hidden within the stoppers.
4. Put the notebook computer back over and receptive the LCD screen copy.
Slide a flat plus thin object, such to be a screwdriver, directly
underneath the seam on the plastic bezel underneath any LCD screen.
Wiggle the screwdriver around gently until the bezel pops journey
case. Lift the bezel up and confirm if there is a new cable running to
this motherboard. Disconnect the cable if you experience one.
5. Pull the way it is on the screen in your direction, and then remove the item from
the laptop. Locate the inverter board towards the bottom of the screen plus
find the cable running on the inverter board to that motherboard. Pull
off the strip of tape within the board and remove the actual screws holding it through
place if there are any with your particular model of laptop computer. Disconnect
the cable on the motherboard.
6. Connect this motherboard cable for vinyl bezel and place any bezel
back onto this laptop case. Finally, just put the battery into your laptop
and power the item on, and then if the manufacturer抯 logo appear within the
screen, it mean that you'll be successfull to install the revolutionary inverter
board and cable connection rightly.

Article Tags:
Inverter Mother board